|
|
|
|
|
 |
|
|
302 Windsor - 351 Windsor - 302/351 Cleveland - 429/460 - FE Series - 4.6/5.4L Modular
|
|
|
Ford - 302 Windsor
|
|
|
|
|
Autotec Series forged pistons for 4.000 bore Ford 302 Windsor based engines are available in flat top, inverted dome, milled dish designs, or domed configurations. Standard ring packs are 1.5 1.5 3.0 widths with reduced radial dimensions. Wrist pins are .912 or .927 diameter by 2.700 long as indicated in the technical specifications, and wire locks, along with oil rail supports (if required), are included. Broached pin-oilers and gas accumulator grooves are incorporated at no additional cost. Domes and combinations not listed are available as a custom piston.
|
|
|
|
|
|
|
Ford - 351 Windsor
|
|
|
|
|
|
Autotec Series forged pistons for 4.000 bore Ford 351 Windsor based engines are available in flat top, inverted dome, milled dish designs, or domed configurations. Standard ring packs are 1.5 1.5 3.0 widths with reduced radial dimensions. Wrist pins are .912 or .927 diameter by 2.700 long as indicated in the technical specifications, and wire locks, along with oil rail supports (if required), are included. Broached pin-oilers and gas accumulator grooves are incorporated at no additional cost. Domes and combinations not listed are available as a custom piston.
|
|
|
|
|
|
|
Ford - 351 Cleveland
|
|
|
|
|
Autotec Series forged pistons for 4.000 bore Ford 351 Cleveland based engines are available in flat top, inverted dome, or milled dish designs. Standard ring packs are 1.5 1.5 3.0 widths with reduced radial dimensions. Wrist pins are .912 or .927 diameter by 2.700 long as indicated in the technical specifications, and wire locks, along with oil rail supports (if required), are included. Broached pin-oilers and gas accumulator grooves are incorporated at no additional cost. Domes and combinations not listed are available as a custom piston.
|
|
|
|
|
|
|
Ford - FE Series
|
|
|
|
|
|
Autotec Series forged pistons for 4.233 bore Ford Series based engines are available in flat top, inverted dome, or milled dish designs. Standard ring packs are 1/15 1/16 3/16 widths with D Wall radial dimensions. Wrist pins are .975 or .990 diameter by 2.700 long as indicated in the technical specifications, and wire locks, along with oil rail supports (if required), are included. Broached pin-oilers and gas accumulator grooves are incorporated at no additional cost. Domes and combinations not listed are available as a custom piston.
|
|
|
|
|
|
|
Ford - 429/460
|
|
|
|
|
|
Autotec Series forged pistons for 4.360 bore Ford 429/460 based engines are available in flat top, inverted dome, or milled dish designs. Standard ring packs are 1/15 1/16 3/16 widths with D Wall radial dimensions. Wrist pins are .990 or 1.040 diameter by 2.800 long as indicated in the technical specifications, and wire locks, along with oil rail supports (if required), are included. Broached pin-oilers and gas accumulator grooves are incorporated at no additional cost. Domes and combinations not listed are available as a custom piston.
|
|
|
|
|
|
|
