Edelbrock Cylinder Heads

Custom Piston Worksheet & Order Form (pdf)

Home > Cylinder Heads > Edelbrock Cylinder Heads > Ford > Ford_FE Series >

Edelbrock Cylinder Heads_Performer RPM_170cc_Ford FE Series_76cc_Hydraulic Roller Camshaft

Photo may not be actual product

Price $945.00

Product Code: EDE-60075

Description

Technical Specs

The Edelbrock 60069 Performer RPM cylinder head is designed for use with 1961 to 1976 FE Series Ford engines. Edelbrock Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat of the pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Fits FE Series Engines
550+ Horsepower Capable
76cc Combustion Chamber
Hydraulic Roller Camshaft
170cc Intake Port
Cast and machined in the USA

In need of more air to meet your power goals? VPE offers complete porting services for intake manifolds and cylinder heads.

https://www.p65warnings.ca.gov/

Item Code	EDE-60075
Vendor	Edelbrock
Product Type	Cylinder Heads
Product Model	Performer RPM
CARB EO Number	No
Material	A356 Aluminum
Deck Thickness	.625
Assembled	Yes
Combustion Chamber Shape	Kidney
Combustion Chamber Volume	76
Intake Port Volume (cc)	170
Exhaust Port Volume (cc)	125
Combustion Chamber CNC	No
Intake Port CNC (cc)	No
Exhaust Port CNC (cc)	No
Spark Plug Style	Angle
Intake Port Shape	Rectangular
Intake Port Location	Standard
Intake Valves	2.090
Intake Stem Diameter	11/32
Intake Valve Angle (degrees)	13
Exhaust Port Shape	Square
Exhaust Port Location	Standard
Exhaust Valves	1.660
Exhaust Stem Diameter	11/32
Exhaust Valve Angle (degrees)	13
Camshaft Type	Hydraulic Roller
Valve Spring Diameter	1.550
Valve Spring Type	Dual
Damper	Yes
Maximum Lift	.600
Retainer Material	Steel
Valve Lock Type	7 degree
Valve Guide Material	Manganese Bronze
Valve Seat Material	Ductile Iron
Valve Seat Machining	3 angle
Valve Stem Seal Type	Positive Stop
Rocker Studs	N/A
Guideplates	N/A
Guideplate Pushrod Size	Application Specific
Drilled Steam Holes	No
Oiling	Through Head
Heat Crossover	No
Quantity	Sold Individually (ea)
Valve Cover	Perimeter Bolt
Block	FE Series
Notes:	Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Edelbrock stud kit EDL-6009 provides better rocker shaft retention and is highly recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the possibility of bottoming the rocker shaft bolts in the head. Heads have the 16-bolt 428 Cobra Jet exhaust flange bolt pattern.

Browse for more products in the same category as this item:

Cylinder Heads > Edelbrock Cylinder Heads > Ford > Ford_FE Series