To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.

  Home > Balancers > Romac > Blower Balancers (All Series) >

Romac Damper_SFI_ Steel Inner/Steel Outer_Blower_Ford Windsor 289_351_Satin_External (28oz)
Romac Balancer

Photo may not be actual product

  
Alternative Views:
Price $315.00


Product Code: ROM-0209-28B

Description
 


The Romac Red Series are constructed with a Steel Inner Hub / Steel Outer Ring, for Mild Street, Strip performance engines and offer increased harmonic absorption over stock units. Most have 360 degreed outer rings and are similar in weight to factory cast units but with the added safety of an encapsulated outer ring. They are available in External or Neutral balance, and weigh from 6 to 11 pounds. Romac Red Series Balancers are effective to 8,000 RPM.

Balancers can be ordered with undersized bores to suit undersized crankshafts. Please call for assistance with these applications. To be sure of the bore size you need you should measure the crankshaft snout prior to purchase. Additional charges will apply.

Part ROM-0209-2B
Application Ford Windsor 289-251W - Blower Balancer
Use All
Balance External (28oz)
SFI Approved Yes (18.1 Specification)
Overall Diameter 6.200
Overall Length 3.085
Nose ID 1.375 - 1.3755
Seal Diameter 1.875
Pulley Grooves 0
Serpentine Grooves 0
Keyways Dual
Pulley Pattern Dual - 4 Bolt is evenly spaced for blower pulleys _ Stock 4 bolt pulleys will not fit.
Material Steel Inner/Steel Outer
Type Elastomer
Finish Satin
Timing Marks Yes
Degree Range 360
Weight 10lb 15oz
Vendor Romac
Notes: Flat Face Pulley Surface Dual keyways for blower applications


www.P65Warnings.ca.gov


Browse for more products in the same category as this item:

Balancers > Romac > Blower Balancers (All Series)