To get the latest news about Vigilante Performance's sales and new products, please enter your email address below.





  Home > Balancers > Romac > Steel Inner/Aluminum Outer (Gold Series) >

Romac Damper_SFI_ Steel Inner/Aluminum Outer_Ford Windsor 289_351_Satin_External (50oz)
Romac Balancer

Photo may not be actual product

 
Alternative Views:


Price $335.00


Product Code: ROM-0209SA-50

Description
 


The Romac Gold Series Balancers are constructed with a Steel Inner Hub/Aluminum Outer Ring, for very high performance Street, Marine or Race engines requiring the added insurance of a Steel Inner Hub for strength where dry sump pumps, etc, may be installed.

We recommend this style of balancer over all other balancers produced due to its flexibility and endurance characteristics. Weight savings of approximately 33% can be achieved with this style of balancer over the Red Series or factory units. They are available in External or Neutral balance with weights ranging from 4 to 7.75 lbs. Romac Gold Series Balancers are effective to 10,000 RPM.

Balancers can be ordered with undersized bores to suit undersized crankshafts. Please call for assistance with these applications. To be sure of the bore size you need you should measure the crankshaft snout prior to purchase. Additional charges will apply.

Part ROM-0209SA-50
Application Ford Windsor 289-251W
Use All
Balance External (50oz)
SFI Approved Yes (18.1 Specification)
Overall Diameter 6.200
Overall Length 3.085
Nose ID 1.375 - 1.3755
Seal Diameter 1.875
Pulley Grooves 0
Serpentine Grooves 0
Bolt Holes 3/4
Pulley Pattern Dual
Material Steel Inner/Aluminum Outer
Type Elastomer
Finish Satin
Timing Marks Yes
Degree Range 360
Weight 6lb 15oz
Vendor Romac
Notes: Flat Face Pulley Surface


www.P65Warnings.ca.gov


Browse for more products in the same category as this item:

Balancers > Romac > Steel Inner/Aluminum Outer (Gold Series)
Balancers > Romac > Steel Inner/Aluminum Outer (Gold Series) > Ford - Windsor